DTC Confirmation Procedure: Notes

CAUTION: Never remove fuel filler cap during the DTC confirmation procedure.

Fig 1: CONSULT II Display (1 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.

NOTE:

If DTC P1456 is displayed with P1442, perform TROUBLE DIAGNOSIS FOR DTC P1456 first.
If "DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
After repair, make sure that the hoses and clips are installed properly.

Fig 2: CONSULT II Display (2 Of 3)

Courtesy of NISSAN MOTOR CO., U.S.A.