October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Position Sensor
- Reconnect all harness connectors disconnected.
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING
"
.
- Turn ignition switch ON.
- Set selector lever to D position (A/T models) or 1st position (M/T models).
- Check voltage between ECM terminals 50 (TP sensor 1), 69 (TP sensor 2) and engine ground under the following conditions.
Courtesy of NISSAN MOTOR CO., U.S.A.
- If NG, replace electric throttle control actuator and go to the next step.
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING
"
.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Perform "IDLE AIR VOLUME LEARNING
"
.