October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Position Sensor
- Reconnect all harness connectors disconnected.
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING
"
.
- Turn ignition switch ON.
- Set selector lever to D position (A/T models) or 1st position (M/T models).
- Check voltage between ECM terminals 50 (TP sensor 1), 69 (TP sensor 2) and engine ground under the following conditions.
Courtesy of NISSAN MOTOR CO., U.S.A.
Courtesy of NISSAN MOTOR CO., U.S.A.
- If NG, replace electric throttle control actuator and go to the next step.
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING
"
.
- Perform "IDLE AIR VOLUME LEARNING
"
.