LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Quest SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P1226: TP Sensor >> DTC Confirmation Procedure >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat step 3 to 4 for 32 times.
  6. If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE  "
    Fig 1: Identifying Data Monitor Display Screen
    G00884216Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals