LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Quest SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0102, P0103: MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0103 >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Displaying Data Monitor Screen
    G00775320Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .

    If DTC is not detected, go to next step.

  5. Start engine and wait at least 5 seconds.
  6. If DTC is detected, go to DIAGNOSTIC PROCEDURE  .
scientia non olet · About LEMON Manuals