Inspection Procedure

Turn ignition switch OFF.
Connect GST to data link connector, which is located under LH dash panel near the hood opener handle.
Turn ignition switch ON.

Fig 1: Connecting GST To Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this section, sample screens are shown in Fig 2 and Fig 3 .)

Fig 2: Displaying Program Card
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform each diagnostic mode according to each service procedure.
For further information, see the GST Operation Manual of the tool maker.

Fig 3: Identifying OBD II FUNCTIONS Screen
Courtesy of NISSAN MOTOR CO., U.S.A.