Band Servo Piston Assembly: Assembly
- Install D-rings to band servo piston retainer.
- Apply ATF to D-rings.
- Pay attention to position of each D-ring.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install band servo piston stem, band servo thrust washer, OD servo return spring and spring retainer to band servo piston.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Place piston stem end on a wooden block. While pushing servo piston spring retainer down, install E-ring.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install O-rings to servo piston retainer.
- Apply ATF to O-rings.
- Pay attention to the positions of the O-rings.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install band servo piston assembly to servo piston retainer by pushing it inward.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install D-ring to OD servo piston.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install O-rings to OD servo piston retainer.
- Apply ATF to O-rings.
- Pay attention to the positions of the O-rings.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install OD servo piston to OD servo piston retainer.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install band servo piston assembly and 2nd servo return spring to transmission case.
- Apply ATF to O-ring of band servo piston and transmission case.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install OD servo piston assembly to transmission case.
- Apply ATF to O-ring of band servo piston and transmission case.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Install band servo piston snap ring to transmission case.
Courtesy of NISSAN MOTOR CO., U.S.A.