Quick Reference Table

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Select an malfunctioning diagnosis No. in DIAGNOSIS RESULT QUICK REFERENCE TABLE .
Find estimated malfunctioning system in DIAGNOSIS RESULT QUICK REFERENCE TABLE and perform check by referring to "WIRING DIAGRAM - COMM - ".

Turn the ignition switch OFF and perform self-diagnosis again.

SCREEN SWITCH CHART

Screen switch

Diagnosis No.

Switch color

Navigation ⁽¹⁾

GPS antenna

Red

Gray

Yellow

⁽¹⁾	Navigation = NAVI control unit

CAUTION:

When A/C and AV switch has a malfunction, you cannot start.
When display has a malfunction, you cannot start.
Check the following when the self-diagnosis mode cannot be used.
- AV communication line between display control unit and A/C and AV switch. Refer to "AV COMMUNICATION LINE CHECK (BETWEEN DISPLAY CONTROL UNIT AND A/C AND AV SWITCH) ".
- A/C and AV switch power supply and ground circuit. Refer to "POWER SUPPLY AND GROUND CIRCUIT CHECK FOR A/C AND AV SWITCH ".
- Display communication line between display control unit and display. Refer to "DISPLAY COMMUNICATION LINE CHECK (BETWEEN DISPLAY CONTROL UNIT AND DISPLAY) ".
- Display power supply and ground circuit. Refer to "POWER SUPPLY AND GROUND CIRCUIT CHECK FOR DISPLAY ".