Inspection Procedure
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- SELF-DIAGNOSIS RESULT CHECK
Check self-diagnosis results.
SELF-DIAGNOSIS RESULTSSelf-diagnosis results BATTERY VOLTAGE Is the above displayed in the self-diagnosis display items?
- YES: GO TO 2.
- NO: Inspection End.
- CONNECTOR INSPECTION
- Disconnect the ABS actuator and electric unit (control unit) connector E125.
- Check the terminals for deformation, disconnection, looseness or damage.
OK or NG
- OK: GO TO 3.
- NG: Repair or replace as necessary.
- ABS/TCS/VDC CONTROL UNIT POWER AND GROUND CIRCUIT INSPECTION
Measure the voltage and continuity between the ABS actuator and electric unit (control unit) harness connector E125 and body ground.
VOLTAGE SPECIFICATIONSSignal name ABS actuator and electric unit (control unit) harness connector E125 Body ground Measured value Power supply 1 - Battery voltage (Approx. 12V) 32 Ground 16 - Continuity should exist. 47 OK or NG
- OK: Check the battery for loose terminals, low voltage, etc. Repair as necessary.
- NG: Repair the circuit.