LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 423 (Engine Control System - DTC) >> DTC P1111, P1136: IVT Control Solenoid Valve >> Diagnostic Procedure >> 3. Check Intake Valve Timing Control Solenoid Valve Output Signal Circuit For Open And Short
April 5, 2026: LEMON Manuals is launched! Read the announcement.

3. Check Intake Valve Timing Control Solenoid Valve Output Signal Circuit For Open And Short

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ECM harness connector.
  3. Check harness continuity between ECM terminal 11 (bank 1) or 10 (bank 2) and intake valve timing control solenoid valve terminal 1. Refer to WIRING DIAGRAM.
    1. Continuity should exist. 
  4. Also check harness for short to ground and short to power.

OK or NG 

  1. OK: GO TO 5 .
  2. NG: GO TO 4.
scientia non olet · About LEMON Manuals