Diagnostic Procedure
WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport and 2002 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.
- Perform ON-BOARD DIAGNOSTIC II SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. After performing OBD-II system check, go to next step.
- Turn ignition on. Using scan tool, read and record FAILURE RECORDS data. Clear DTCs and monitor DTC information for DTC P0402 while operating vehicle as specified in CODE ENABLE CRITERIA . If scan tool displays DTC P0402 FAILED THIS IGN, check for intermittent problem. See DIAGNOSTIC AIDS . If scan tool does not display DTC P0402 FAILED THIS IGN, go to next step.
- Inspect exhaust system for leaks or modification of original installed parts. If problem is found, repair as necessary. After repair is complete, see VERIFYING VEHICLE REPAIR under SELF-DIAGNOSTIC SYSTEM. If exhaust system is okay, go to next step.
- Remove EGR valve and check pintle, valve, passages and adapter for excessive deposits or restriction. Check EGR valve gasket and pipes for leaks. If a problem is found, clean, repair or replace components as necessary. After repair is complete, see VERIFYING VEHICLE REPAIR under SELF-DIAGNOSTIC SYSTEM. If no problem is found, go to next step.
- Remove EGR inlet and outlet pipes from exhaust manifold and intake manifold. Inspect manifold EGR ports and pipes for damage, restriction or blockage. If a problem is found, clean, repair or replace components as necessary. After repair is complete, see VERIFYING VEHICLE REPAIR under SELF-DIAGNOSTIC SYSTEM. If no problem is found, check for intermittent problem. See DIAGNOSTIC AIDS .