Operation Procedure
WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Touch "START (NISSAN BASED VHCL)" "RAS/HICAS" "ECU PART NUMBER".
- If RAS/HICAS is not displayed, print the "SELECT SYSTEM" screen. Then refer to
"Precautions When Using CONSULT-II
".NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.
- If RAS/HICAS is not displayed, print the "SELECT SYSTEM" screen. Then refer to
"Precautions When Using CONSULT-II
".
- The part number described on RAS control unit sticker is displayed.