Control When Operating Enable Conditions No Longer Met
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
DESCRIPTION AND OPERATION CHART
| Description | Operation | Condition |
|---|---|---|
| Main switch turned OFF during power open or close | Warning chime active and clutch intermittent mode → Shift to manual mode (Recovery to power mode when main switch turned ON or door fully closed) | → Shift to manual mode |
| A/T selector lever P position | Warning chime active continuously (0.66 second dings) and one-way operation continues if closing Warning chime active continuously (0.33 second beep followed by 0.33 second pause) and one-way operation continues if opening. Warning chime remains on after completing open function. |
Stop continued |
| Voltage drop 11 - 9V | One-way operation continued (equivalent to the case of starting voltage ← 11V for handle operation with warning chime active) | Normal operation |
| Voltage drop 9 - micro reset V | Motor stopped (clutch ON) → stop continued while still constrained → (Switching the main switch OFF shifts operation to intermittent mode.) | → Shift to manual mode unless voltages returns to >9 V within 5 seconds |
| Voltage drop below micro reset V (Clutch hold not possible voltage) |
|
→ Shift to manual mode |