"KEY" Warning Lamp (RED) Check

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK WARNING LAMP OPERATION
With CONSULT-III
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-III.
- Select "RED ON".
"KEY" warning lamp (red) should illuminate.

Without CONSULT-III
1. Turn ignition switch OFF.
2. Ensure Intelligent Key is outside and away from the vehicle.
3. While monitoring the combination meter warning lamps, push the ignition knob switch.
4. The "KEY" warning lamp (red) should illuminate indicating that the Intelligent Key is not nearby.
Fig 1: Identifying Combination Meter Warning Lamps
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: INSPECTION END

NG: Check combination meter. Refer to "COMBINATION METERS ".