Main 12 Causes of Overheating
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
OVERHEATING SPECIFICATIONS
| Engine | Step | Inspection item | Equipment | Standard | Refer to | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OFF | 1 |
|
|
No blocking | - | ||||||||
| 2 |
|
|
50 - 50% coolant mixture | SAE VISCOSITY NUMBER | |||||||||
| 3 |
|
|
Coolant up to MAX level in reservoir tank and radiator filler neck | ENGINE MAINTENANCE | |||||||||
| 4 |
|
|
59 - 98 kPa (0.6 - 1.0 kg/cm2, 9 - 14 psi) (Limit) | CHECKING RESERVOIR CAP | |||||||||
| ON(2) | 5 |
|
Visual | No leaks | ENGINE COOLANT | ||||||||
| ON(2) | 6 |
|
|
Both hoses should be hot | WATER INLET AND THERMOSTAT ASSEMBLY | ||||||||
| ON(1) | 7 |
|
|
Operating | See trouble diagnosis for DTC P1217 (DTC P1217 ENGINE OVER TEMPERATURE ). | ||||||||
| ON(2) | 7 |
|
|
Operating | See ENGINE COOLING FAN . | ||||||||
| OFF | 8 |
|
|
Negative | - | ||||||||
| ON(3) | 9 |
|
|
Gauge less than 3/4 when driving | - | ||||||||
|
|
No overflow during driving and idling | ENGINE MAINTENANCE | ||||||||||
| OFF(4) | 10 |
|
|
Should be initial level in reservoir tank | ENGINE MAINTENANCE | ||||||||
| OFF | 11 |
|
|
0.1 mm (0.004 in) Maximum distortion (warping) | INSPECTION AFTER REMOVAL | ||||||||
| 12 |
|
|
No scuffing on cylinder walls or piston | CYLINDER BLOCK | |||||||||
|
|||||||||||||
For more information, refer to "OVERHEATING CAUSE ANALYSIS ".