DTC Confirmation Test (2.4L Models - Using Generic Scan Tool)
WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
Start engine and drive vehicle at a speed of more than 43 MPH for 2 consecutive minutes. Stop vehicle and let engine idle for at least 6 seconds. Turn ignition off and wait at least 10 seconds. Start engine and drive vehicle at a speed of more than 43 MPH for 2 consecutive minutes. Stop vehicle and let engine idle for at least 6 seconds. Select MODE 3 with scan tool. If DTC is detected, go to DIAGNOSTIC PROCEDURE (2.4L) . If DTC is not detected, system is okay at this time.