DTC Confirmation Test "A"
WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition on. Select DATA MONITOR mode with scan tool. Ensure engine coolant temperature is less than 122°F (50°C). Start engine and let it idle for at least 8 seconds.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, turn ignition off, wait at least 5 seconds and go to appropriate DTC CONFIRMATION TEST "B".