LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transaxle - Re4F03B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (With GST)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Erase DTC (With GST)

WARNING: This page is about a different variant/trim than selected.
  1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 5 seconds and then turn it "ON" (engine stopped) again.
  2. Perform TCM Self-diagnostic Procedure. Refer to "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) ".

    (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)

  3. Select Mode 4 with Generic Scan Tool (GST). For details, refer to HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFO .
scientia non olet · About LEMON Manuals