Initialization Procedure
WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
If the sunroof does not close or open automatically, use the following procedure to return sunroof operation to normal.
- Push the TILT UP switch and start the tilt up operation.
- Release the TILT UP switch once, press the TILT UP switch again. Keep pushing the switch until tilt lid pops up.
- The glass lid will move toward tilt up direction and will be stopped mechanically, and then it will be automatically fully closed. (Keep pushing the switch during this operation)
- Release the switch again. and push the TILT UP switch within the first 10 seconds. (Keep pushing the switch)
- After 4 seconds. the class lid will be automatically operated in sequence of "slide open" => "slide close "=>" tilt up "=>" tilt down".
- After the glass lid stops. release the switch after 0.5 seconds. (Keep pressing the switch during this operation)
- If PRE-SELECTED switch operates normally, this initialization is done.