System Description: Notes

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

The thing to adjust the position of sunroof slide position in six stages by the thing to operate preselect switch can be done.

Power supplied at all time

through 50A fusible link (letter F , located in the fuse and fusible link box.)
to BCM terminal 7.
through BCM terminal 28
to sunroof motor assembly terminal 7.

With ignition switch ON or START position, Power is supplied

through 10A fuse [No. 1, located in the fuse block (J/B)]
to BCM terminal 35
though BCM terminal 29
to sunroof motor assembly terminal 9.

Ground is supplied

to BCM terminal 8
through body ground E13 and E28.
to sunroof motor assembly terminal 10
through body ground M14 and M78.