LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (O/D Direct Clutch Speed Sensor) >> O/D Direct Clutch Speed Sensor >> On-Vehicle Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Repair

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT EXHAUST PIPE (See  EXHAUST SYSTEM  ) 
  2. DISCONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR 
  3. REMOVE O/D DIRECT CLUTCH SPEED SENSOR 
    1. Remove the bolt and O/D direct clutch speed sensor.
    2. Remove the O-ring from the O/D direct clutch speed sensor.
  4. INSTALL O/D DIRECT CLUTCH SPEED SENSOR 
    1. Coat a new O-ring with ATF and install it to the O/D direct clutch speed sensor.
    2. Install the O/D direct clutch speed sensor to the transmission case and torque the bolt.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

  5. CONNECT O/D DIRECT CLUTCH SPEED SENSOR CONNECTOR 
  6. INSTALL FRONT EXHAUST PIPE (See  EXHAUST SYSTEM  ) 
    Fig 1: Identifying Direct Clutch Speed Sensor
    G01317397Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals