Terminals and Reference Value for Combination Meter
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUE FOR COMBINATION METER
| Terminal No. | Wire color | Item | Condition | Reference value (V) (Approx.) |
|
| Ignition switch | Operation or condition | ||||
| 2 | G/Y | Fuel level sensor signal input | - | - | Refer to FUEL LEVEL SENSOR UNIT INSPECTION . |
| 3 | B | Fuel level sensor signal output | - | - | Refer to FUEL LEVEL SENSOR UNIT INSPECTION . |
| 7 | R/Y | Stop lamp switch input | OFF | Brake pedal pressed | 12V |
| Brake pedal released | 0V | ||||
| 10 | R/Y | Illumination control switch | - | Lighting switch ON | Refer to ILLUMINATION OPERATION BY LIGHTING SWITCH ". |
| 11 | V/R | Vehicle speed signal output for 4 Speed A/T | ON | Vehicle speed signal received over CAN | Refer to "SYSTEM DESCRIPTION " (without NAVI) or "SYSTEM DESCRIPTION " (with NAVI). |
| 14 | P/L | Vehicle speed signal output | ON | Vehicle speed signal received over CAN | Refer to "SYSTEM DESCRIPTION " (without NAVI) or "SYSTEM DESCRIPTION " (with NAVI). |
| 27 | L | CAN H | - | - | - |
| 28 | Y | CAN L | - | - | - |
| 30 | O | Ignition switch ON or START | ON | - | Battery voltage |
| 31 | Y/R | Battery power supply | OFF | - | Battery voltage |
| 32 | B/W | Ground | ON | - | 0V |