LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Continuously Variable Transmission (CVT)) >> Shift Control System >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove knob cover below selector lever downward.
  2. Pull lock pin out of selector lever knob.
  3. Remove selector lever knob.
  4. Remove A/T console finisher.
    1. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove console box assembly.
    1. Refer to "REMOVAL AND INSTALLATION ".
  6. Disconnect control cable of control device.
  7. Disconnect control device harness connector.
  8. Remove control device assembly.
Fig 1: Removing Knob Cover
G00770063Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals