LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1226 (2004.5 - Body Control Module - Sedan) >> BCM (Body Control Module) >> CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF-DIAGNOSTIC RESULT 
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
    1. Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
    2. Select "BCM control unit" on "SELECT WORK ITEM" screen, and select "SELF-DIAG RESULTS".
    3. Check display content in self-diagnostic results.
      DIAGNOSIS ITEM

      CONSULT-II display code Diagnosis item
      U1000 INITIAL DIAG
      TRANSMIT DIAG
      ECM
      IPDM E/R
      METER/M&A
      I - KEY

      Contents displayed

      No malfunction: INSPECTION END

      Malfunction in CAN communication system: After printing the monitor items, go to CAN SYSTEM - SEDAN - 2004.5 . Refer to PRECAUTIONS WHEN USING CONSULT-II .

scientia non olet · About LEMON Manuals