Operation Procedure
WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Close hood front door RH and lift wiper arms away from windshield (to prevent glass damage by wiper operation).NOTE: When auto active test is performed with hood opened, sprinkle water on windshield beforehand.
- Turn ignition switch OFF.
- Turn ignition switch ON and, within 20 seconds, press front door switch LH 10 times. Then turn ignition switch OFF.
- Turn ignition switch ON within 10 seconds after ignition switch OFF.
- When auto active test mode is actuated, horn chirps once.
- After a series of operations is repeated three times, auto active test is completed.NOTE: When auto active test mode has to be cancelled halfway, turn ignition switch OFF.CAUTION: Be sure to inspect BL-35, "Check Door Switch / With Navigation System"or BL-36, "Check Door Switch / Without Navigation System" when the auto active test cannot be performed.