LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (2004.5 - IPDM E/R (Intelligent Power Distribution Module Engine Room) - Sedan) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Consult-II >> Active Test >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  2. Touch item to be tested, and check operation.
  3. Touch "START".
  4. Touch "STOP" while testing to stop the operation.
    TEST ITEM DESCRIPTION - ACTIVE TEST

    Test item CONSULT-II screen display Description
    Tail lamp output TAIL LAMP With a certain ON-OFF operation, the tail lamp relay can be operated.
    Rear window defogger output REAR DEFOGGER With a certain ON-OFF operation, the rear window defogger relay can be operated.
    Front wiper (HI, LO) output FRONT WIPER With a certain operation (OFF, HI ON, LO ON), the front wiper relay (Lo, Hi) can be operated.
    Cooling fan output MOTOR FAN With a certain operation (1,2,3,4), the cooling fan can be operated.
    Headlamp washer output HEAD LANP WASHERNOTE -
    Lamp (HI, LO,FOG) output LAMPS With a certain operation (OFF, HI ON, LO ON, FOG ON), the lamp relay (Lo, Hi, Fog) can be operated.
    Horn output HORN Push "ON" button, horn relay operates 20ms.
    NOTE: This items are displayed, but they cannot be tested.