LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (2004.5 - IPDM E/R (Intelligent Power Distribution Module Engine Room) - Sedan) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Consult-II >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT MONITOR ITEM" screen.
  2. Touch "ALL SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    OPERATION PROCEDURE LIST

    ALL SIGNALS All items will be monitored.
    MAIN SIGNALS Monitor the predetermined item.
    SELECTION FROM MENU Select any item for monitoring.
  3. Touch "START".
  4. Touch the required monitoring item on "SELECTION FROM MENU". In "ALL SIGNALS", all items are monitored. In "MAIN SIGNALS", predetermined items are monitored.
  5. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".

    All Signals, Main Signals, Selection From Menu 

    MONITORING ITEM LIST

    Item name CONSULT-II screen display Display or unit Monitor item selection Description
    ALL SIGNALS MAIN SIGNALS SELECTION FROM MENU
    Motor fan request MOTOR FAN REQ 1/2/3/4 X X X Signal status input from ECM  
    Compressor request AC COMP REQ ON/OFF X X X Signal status input from ECM
    Tail & clear request TAIL & CLR REQ ON/OFF X X X Signal status input from BCM
    H/L LO request HL LO REQ ON/OFF X X X Signal status input from BCM
    HL HI request HL HI REQ ON/OFF X X X Signal status input from BCM
    FR fog request FR FOG REQ ON/OFF X X X Signal status input from BCM
    HL washer request HL WASHER REQNOTE OFF X   X -
    FR wiper request FR WIP REQ STOP/1LOW/ LOW/HI X X X Signal status input from BCM
    Wiper auto stop WIP AUTO STOP ACT P/STOP P X X X Output status of IPDM E/R
    Wiper protection WIP PROT OFF/Block X X X Control status of IPDM E/R
    Starter request ST RLY REQ ON/OFF X   X Status of input signal NOTE
    Ignition relay status IGN RLY ON/OFF X X X Ignition relay status monitored with IPDM E/R
    Rear window defogger request RR DEF REQ ON/OFF X X X Signal status input from BCM
    Oil pressure switch OIL P SW OPEN/CLOSE X   X Signal status input in IPDM E/ R
    DTLR request DTRL REQNOTE ON/OFF X   X -
    Hood switch HOOD SW ON/OFF X   X Input signal status
    Theft warning horn request THFT HRN REQ ON/OFF X   X Signal status input from BCM
    Horn chirp HORN CHIRP ON/OFF X   X Output status of IPDM E/R
    NOTE:
    • Perform monitoring of IPDM E/R data with the ignition switch ON. When the ignition switch is at ACC, the display may not be correct.
    • This item is displayed, but cannot monitor it.
scientia non olet · About LEMON Manuals