Inspection With CONSULT-II (Self-Diagnosis)
WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
- CHECK SELF DIAGNOSTIC RESULT
- Connect CONSULT-II and select "IPDM E/R" on the Diagnosis System Selection screen.
- Select "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
- Check display content in self diagnostic results.SELF DIAGNOSTIC RESULTS
CONSULT-II display CONSULT-II display code TIME Details of diagnosis result CRNT PAST NO DTC IS DETECTED.
FURTHER TESTING MAY BE REQUIRED.- - - No malfunction CAN COMM CIRC U1000 X X Any of or several items below have errors. - TRANSMIT DIAG
- ECM
- BCM/SEC
NOTE: The Details for Display of the Period Are as Follows:- CRNT: Error currently detected with IPDM E/R.
- PAST: Error detected in the past and memorized with IPDM E/R.
Contents displayed
NO DTC IS DETECTED.FURTHER TESTING MAY BE REQUIRED.: INSPECTION END CAN COMM CIRC: After print-out of the monitor items, refer to "PRECAUTIONS WHEN USING CONSULT-II ".