CONSULT-II Function: Notes

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When the self-diagnosis, data monitor, or active test functions are being executed, EBD, ABS, TCS, and VDC control is disabled.
When using CONSULT-II to conduct ABS/TCS/VDC control unit self-diagnosis, active test, work support, etc., first stop engine, connect the CONSULT-II, and select "ABS".
CONSULT-II self-diagnosis results are displayed without regard to occurrence timing. In some cases later ones (timing value is small) appear on the next screen.
When an error is shown by the CONSULT-II SELF-DIAG RESULTS and CONSULT-II is used to conduct an active test, an engine system malfunction may be shown, be restarting the engine will return the status to normal.