Adjustment of A/T Position
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen nut of control rod.
- Place PNP switch and selector lever in "P" position.
- While pressing lower lever toward rear of vehicle (in "P" position direction), tighten nut to specified torque.CAUTION: Do not push the bracket.
- : 26 N.m (2.7 kg-m, 19 ft-lb)