MAINT Switch (Maintenance Switch)
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- When "MAINT" switch is pressed, display vehicle information screen. As vehicle information, it indicates engine oil, tire rotation, tire pressure.
- Pressing "MAINT" switch once cycles display from engine oil-->tire rotation-->tire pressure-->display OFF-->engine oil.
Engine Oil and Tire Rotation
- Operating the joystick left/right, replace distance can be set.
- When journey distance is the same as replace distance, alert is displayed. (SERVICE ALERT setting is ON.)
- Selected replace distance is 0 - 7,500 miles (0 - 12,000 km) in increments of 500 mile (800 km).
- Press and hold "TRIP RESET or MAINT" switch for 1.5 seconds or longer, reset present journey distance.
- During driving, cannot change settings.
Tire Pressure
- Tire pressure signal is received from BCM through CAN communication line.
- Tire pressure is displayed.
- When FLAT TIRE signal is received from BCM, "FLAT TIRE" is displayed.