Power Window Down Request Signal Check

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK POWER WINDOW REQUEST SIGNAL
1. Start engine.
2. Soft top switch operate, check voltage between Soft Top Control Unit Connector and ground.
Fig 1: Soft Top Control Unit Connector B67 Terminal 36 (Y/G) & Ground Voltage Specifications Table
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Soft Top Control Unit Connector B67 Terminal 36 (Y/G) & Ground Voltage Test
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
- OK: Check the condition of harness and connector.
- NG: Replace soft top control unit.