Function and System Application
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTION AND SYSTEM APPLICATION CHART
| Diagnostic test mode | Function | Engine | A/T | Air bag | ABS | ABS (Including VDC) | Air Pressure Monitor | ||
|---|---|---|---|---|---|---|---|---|---|
| Work support | This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT-II. | (1) | - | - | - | (1) | (1) | ||
| DTC work support | Select the operating condition to confirm Diagnosis Trouble Codes. | - | (1) | - | - | - | - | ||
| Self-diagnostic results | Self-diagnostic results can be read and erased quickly. | (1) | (1) | (1) | (1) | (1) | (1) | ||
| Trouble diagnostic record | Current self-diagnostic results and all trouble diagnostic records previously stored can be read. | - | - | (1) | - | - | - | ||
| ECU discriminated No. | Classification number of a replacement ECU can be read to prevent an incorrect ECU from being installed. | - | - | (1) | - | - | - | ||
| Data monitor | Input/Output data in the ECU (ECM) can be read. | (1) | (1) | - | (1) | (1) | (1) | ||
| Data monitor (Spec.) | The specified values will be displayed when an OK/NG judgment is difficult for the DATA MONITOR items by Bar Chart and Line Graph. | (1) | - | - | - | - | - | ||
| Active test | Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ECUs and also shifts some parameters in a specified range. | (1) | - | - | (1) | (1) | - | ||
| SRT & DTC confirmation | The results of SRT (System Readiness Test) and the self-diagnosis status/result can be confirmed. | (1) | (1) | - | - | - | - | ||
| ECU (ECM) part number | ECU (ECM) part number can be read. | (1) | (1) | - | (1) | (1) | (1) | ||
|
|||||||||