2WD Model
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS (2WD MODEL)
| Applied model | VQ40DE | |
| M/T | A/T | |
| Propeller shaft model | 2S1330 (aluminum) | |
| Number of joints | 2 | |
| Coupling method with rear final drive | Flange type | |
| Coupling method with transmission | Sleeve type | |
| Shaft length (Spider to spider) | 1178.8 mm (46.41 in) | 1262.80 (49.72 in) |
| Shaft outer diameter | 102.5 mm (4.00 in) | |
| Journal axial play | 0.02 mm (0.0008 in) or less | |
| Propeller shaft runout limit | 1.02 mm (0.040 in) or less | |
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less | |