General Specifications
WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
4X2 Model
GENERAL SPECIFICATIONS - 4X2 MODEL
| Applied model | VK56DE | |
| Body | King cab | Crew cab |
| Propeller shaft model | 2S1350 | 3S1350 |
| Number of joints | 2 | 3 |
| Coupling method with rear final drive | Flange type | Flange type |
| Coupling method with transmission | Sleeve type | Sleeve type |
| Shaft length (Spider to spider) | 1619 mm (63.74 in) | 869 mm (34.21in) (front shaft) |
| 1209 mm (47.60 in) (rear shaft) | ||
| Shaft outer diameter | 127.6 mm (5.02 in) | 88.9 mm (3.50 in) |
| Journal axial play | 0.02 mm (0.0008 in) or less | |
| Propeller shaft runout limit | 1.02 mm (0.0402 in) or less | 0.6 mm (0.24 in) or less |
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less | |
4X4 Model
GENERAL SPECIFICATIONS - 4X4 MODEL
| Applied model | VK56DE | |
| Propeller shaft model | Front | Rear |
| 2F1310 | 2S1350 | |
| Number of joints | 2 | |
| Coupling method with front final drive | Flange type | |
| Coupling method with transfer | Flange type | Sleeve type |
| Shaft length (Spider to spider) | 718 mm (28.27 in) | 1619 mm (63.74 in) |
| Shaft outer diameter | 63 5 mm (2.5 in) | 127.6 mm (5.02 in) |
| Journal axial play | 0.02 mm (0.0008 in) or less | |
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less | 1.02 mm (0.0402 in) or less |
| Propeller shaft joint flex effort | 1.96 N.m (0.20 kg-m, 17 in-lb) or less | 2.26 N.m (0.23 kg-m, 20 in-lb) or less |