Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

When installing coil spring on shock absorber, the lower end (2) and upper end (3) must be positioned as shown.
- Shock absorber mounting insulator (1)
- <==: Flat tail
  
  Fig 1: Installing Coil Spring On Shock Absorber
  Courtesy of NISSAN MOTOR CO., U.S.A.
Install upper spring insulator (3) with studs located in line with lower shock mount and in lower seat step. The lower seat step (2) in the shock absorber assembly (1) faces outside of vehicle.
- <==: Front
Tighten the piston rod lock nut to specification. Refer to "COMPONENTS ".
- Use a new piston rod lock nut for assembly.
  
  Fig 2: Installing Upper Spring Insulator
  Courtesy of NISSAN MOTOR CO., U.S.A.