LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1657 (Front Suspension System) >> On-Vehicle Service >> Front Wheel Alignment >> The Alignment Process
April 5, 2026: LEMON Manuals is launched! Read the announcement.

The Alignment Process

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Use only the alignment specifications listed in this article . Refer to "WHEEL ALIGNMENT (UNLADEN*1) ".
  1. When displaying the alignment settings, many alignment machines use "indicators": (Green/red, plus or minus, Go/No Go). Do NOT use these indicators. 
    • The alignment specifications programmed into your alignment machine that operate these indicators may not be correct.
    • This may result in an ERROR.
  2. Some newer alignment machines are equipped with an optional "Rolling Compensation" method to "compensate" the sensors (alignment targets or head units). Do NOT use this "Rolling Compensation" method. 
    • Use the "Jacking Compensation" method. After installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn both ways.
    • See Instructions in the alignment machine you are using for more information.
scientia non olet · About LEMON Manuals