CONSULT-II Function (AUTO DRIVE POS.): Notes
WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
AUTO DRIVE POS. DIAGNOSTIC MODE - DESCRIPTION
| AUTO DRIVE POS. diagnostic mode | Description |
|---|---|
| WORK SUPPORT | Supports inspections and adjustments. Commands are transmitted to the driver seat control unit for setting the status suitable for required operation, input/output signals are received from the driver seat control unit and received data is displayed. |
| SELF-DIAG RESULTS | Displays driver seat control unit self-diagnosis results. |
| DATA MONITOR | Displays driver seat control unit input/output data in real time. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. |
| ECU PART NUMBER | Driver seat control unit part number can be read. |