Symptom Chart
WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART
| Symptom | Diagnoses/service procedure |
|---|---|
| Only setting change function cannot be set with display. | 1. PRELIMINARY CHECK |
| 2. CAN COMMUNICATION INSPECTION USING CONSULT-II (SELFDIAGNOSIS) | |
| 3. If the above systems are normal, check display system | |
| A part of seat system does not operate (both automatically and manually). | 1. SLIDING MOTOR CIRCUIT INSPECTION |
| 2. RECLINING MOTOR CIRCUIT INSPECTION | |
| 3. LIFTING MOTOR (FRONT) CIRCUIT INSPECTION | |
| 4. LIFTING MOTOR (REAR) CIRCUIT INSPECTION | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| A part of pedal adjust and door mirror does not operate (both automatically and manually). | 1. PEDAL ADJUSTING MOTOR CIRCUIT INSPECTION |
| 2. MIRROR MOTOR LH CIRCUIT CHECK | |
| 3. MIRROR MOTOR RH CIRCUIT CHECK | |
| 4. If the above systems are normal, replace the automatic drive positioner control unit. | |
| A part of seat system does not operate (only automatic operation). | 1. SLIDING SENSOR CIRCUIT INSPECTION |
| 2. RECLINING SENSOR CIRCUIT INSPECTION | |
| 3. LIFTING SENSOR (FRONT) CIRCUIT INSPECTION | |
| 4. LIFTING SENSOR (REAR) CIRCUIT INSPECTION | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| A part of door mirror system does not operate (only automatic operation). | 1. MIRROR SENSOR LH CIRCUIT CHECK |
| 2. MIRROR SENSOR RH CIRCUIT CHECK | |
| 3. If the above systems are normal, replace the automatic drive positioner control unit. | |
| All of the automatic operations do not operate. | 1. A/T DEVICE (PARK POSITION SWITCH) CIRCUIT INSPECTION |
| 2. UART COMMUNICATION LINE CIRCUIT INSPECTION | |
| 3. PEDAL ADJUSTING SENSOR CIRCUIT INSPECTION | |
| 4. If all the above systems are normal, replace the automatic drive positioner control unit. | |
| A part of seat system does not operate (only manual operation). | 1. SLIDING SWITCH CIRCUIT INSPECTION |
| 2. RECLINING SWITCH CIRCUIT INSPECTION | |
| 3. LIFTING SWITCH (FRONT) CIRCUIT INSPECTION | |
| 4. LIFTING SWITCH (REAR) CIRCUIT INSPECTION | |
| 5. If the above systems are normal, replace the driver seat control unit. | |
| A part of door mirror does not operate (only manual operation). | 1. DOOR MIRROR REMOTE CONTROL SWITCH (CHANGEOVER SWITCH) CIRCUIT INSPECTION |
| 2. DOOR MIRROR REMOTE CONTROL SWITCH (MIRROR SWITCH) SWITCHING CIRCUIT INSPECTION | |
| 3. If the above systems are normal, replace the automatic drive positioner control unit. | |
| Pedal adjust does not operate. | 1. PEDAL ADJUSTING SWITCH CIRCUIT INSPECTION |
| 2. If the above systems are normal, replace the automatic drive positioner control unit. | |
| Automatic drive positioner system does not operate (only memory switch operation). | 1. SEAT MEMORY SWITCH CIRCUIT INSPECTION |
| 2. If the above systems are normal, replace the automatic drive positioner control unit. | |
| Seat memory indicator lamps 1 and 2 do not illuminate. | 1. SEAT MEMORY INDICATOR LAMP CIRCUIT INSPECTION |
| 2. If all the above systems are normal, replace the automatic drive positioner control unit. | |
| The Entry/Exiting does not operate when door is opened and closed. (the Entry/Exiting operates with key switch) | 1. FRONT DOOR SWITCH CIRCUIT INSPECTION |
| 2. If all the above systems are normal, replace the BCM. | |
| Door mirror system does not operate (only manual operation). | 1. DOOR MIRROR REMOTE CONTROL SWITCH GROUND CIRCUIT INSPECTION |
| Door mirror system does not operate (only automatic operation). | 1. DOOR MIRROR SENSOR POWER SUPPLY AND GROUND CIRCUIT INSPECTION |
| Seat system does not operate (only manual operation). | 1. POWER SEAT SWITCH GROUND CIRCUIT INSPECTION |