Switch Operation
WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
When driver door switch is ON (door is opened), ground is supplied
- to ignition keyhole illumination terminal 2
- through BCM terminal 1.
And power is supplied
- through BCM terminal 41
- to ignition keyhole illumination terminal 1.
When any door switch is ON (door is opened), ground is supplied
- to step lamp (driver side and passenger side) terminal 2
- through BCM terminal 47.
And power is supplied
- through BCM terminal 41
- to step lamp (driver side and passenger side) terminal 1.
When map lamp switch is ON, ground is supplied
- to map lamp terminal 1
- through grounds M30 and M66.
And power is supplied
- through BCM terminal 41
- to map lamp terminal 3.
When rear door switch LH or RH is ON (door is opened), ground is supplied
- to rear door switch LH or RH terminal 1
- through personal lamp LH or RH terminal 1.
And power is supplied
- through BCM terminal 41
- to personal lamp LH and RH terminal 2.
When vanity mirror lamp (driver side and passenger side) is ON, ground is supplied
- to vanity mirror lamp (driver side and passenger side) terminal 2
- through grounds M30 and M66.
And power is supplied
- through BCM terminal 41
- to vanity mirror lamp (driver side and passenger side) terminal 1.
When trunk room lamp switch is OPEN, ground is supplied
- to BCM terminal 57
- through trunk room lamp switch terminals 1 and 2
- through grounds B5 and B29.
When trunk room lamp is ON, ground is supplied
- to trunk room lamp terminal 2
- through BCM terminal 64.
And power is supplied
- to trunk room lamp terminal 1
- through BCM terminal 41.