Control When Handle Open/Closed When Operating Enable Conditions Not Yet Met
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CONTROL WHEN HANDLE OPEN/CLOSED WHEN OPERATING ENABLE CONDITIONS NOT YET MET
| Items | Operation condition | Not met case | Control |
|---|---|---|---|
| Main switch | ON | OFF | Manual mode (Power operation is available with automatic door main switch and remote keyless entry) |
| A/T selector lever P position | P position | Other | Power close operation |
| Voltage drop | 9V or more | 9 - 6V | Stopped while constrained (clutch is engaged and warning chime sounds) |
| 6 - 0V | Manual mode |