System Description: Inputs
WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- to BCM terminal 55
- through 50A fusible link (letter j, located in the fuse and fusible link box).
- to BCM terminal 42
- through 15A fuse [No. 3, located in the fuse block (J/B)].
When the ignition key is inserted in the ignition cylinder, power is supplied
- to BCM terminal 37
- through key switch terminals 1 and 2
- through 15A fuse [No. 19, located in the fuse block (J/B)].
When the ignition switch is in ACC or ON, power is supplied
- to BCM terminal 11
- through 10A fuse [No. 4, located in the fuse block (J/B)].
When the ignition switch is in ON or START, power is supplied
- to BCM terminal 38
- through 10A fuse [No. 16, located in the fuse block (J/B)].
When the front door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 62
- through front door switch LH terminal 1
- through front door switch LH case ground.
When the front door switch RH is ON (door is OPEN), ground is supplied
- to BCM terminal 12
- through front door switch RH terminal 1
- through front door switch RH case ground.
When the sliding door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 63
- through sliding door switch LH terminal 1
- through sliding door switch LH case ground.
When the sliding door switch RH is ON (door is OPEN), ground is supplied
- to BCM terminal 13
- through sliding door switch RH terminal 1
- through sliding door switch RH case ground.
When the back door switch is ON (door is OPEN), ground is supplied
- to BCM terminal 58
- through back door switch terminal 1 (without power back door) or,
- through back door latch terminal 7 (with power back door)
- through back door switch terminal 3 (without power back door)
- through back door latch terminal 8 (with power back door)
- through body grounds D403 and D404.
Keyfob signal is supplied to BCM from the remote keyless entry receiver.
The remote keyless entry system controls operation of the
- power door lock
- sliding door opener (with automatic sliding door system)
- back door opener (with power back door)
- interior lamp and step lamps
- panic alarm
- hazard and horn reminder
- keyless power window down (open)
- auto door lock operation