Special Service Tools
WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOLS SPECIFICATIONS
| Tool number (Kent-Moore No.) Tool name |
Description | |
|---|---|---|
| ST0501S000 (-) Engine stand assembly 1. ST05011000 (-) Engine stand 2. ST05012000 (-) Base |
Disassembling and assembling engine | |
| KV10116200 (J-26336-A) Valve spring compressor 1. KV10115900 (J-26336-20) Attachment 2. KV10109220 (-) Adapter |
Disassembling valve mechanism Part (1) is a component of KV10116200 (J-26336-A), but Part (2) is not so. | |
| KV10107902 (J-38959) Valve oil seal puller |
Replacing valve oil seal | |
| - (J-39386) Valve oil seal drift |
Installing valve oil seal | |
| EM03470000 (J-8037) Piston ring compressor |
Installing piston assembly into cylinder bore | |
| ST16610001 (J-23907) Pilot bushing puller |
Removing pilot converter (A/T models) | |
| (J-47128) Seal installer |
Installing rear main seal | |
| KV10111100 (J-37228) Seal cutter |
Removing oil pan (lower and upper), front and rear timing chain case, etc. | |
| WS39930000 (-) Tube presser |
Pressing the tube of liquid gasket | |
| KV10112100 (BT-8653-A) Angle wrench |
Tightening bolts for bearing cap, cylinder head, etc. in angle | |
| - (J-44626) Air fuel sensor Socket |
Loosening or tightening air fuel ratio A/F sensor a: 22 mm (0.87 in) |
|
| KV10114400 (J-38365) Heated oxygen sensor wrench |
Loosening or tightening heated oxygen sensor 1 a: 22 mm (0.87 in) |
|
| KV10117700 (J-44716) Ring gear stopper |
Removing and installing crankshaft pulley | |
| - (J-45488) Quick connector release |
Removing fuel tube quick connectors in engine room (Available in SEC. 164 of PARTS CATALOG: Part No. 16441 6N210) |
|