Steering Linkage: Inspection

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT POWER STEERING RACK
1. Using a dial indicator, check for runout of the steering rack and teeth wear.
  Maximum runout: 0.1 mm (0.004 in.)
  
  If runout exceeds the maximum, replace the power steering rack.
  
  NOTE: Make sure that the steering rack is placed horizontally.
2. Check the rack surface for wear and damage. If runout exceeds the maximum, replace the power steering link assembly.
Fig 1: Checking Power Steering Rack Runout
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002