Commercial Service Tools

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

COMMERCIAL SERVICE TOOLS REFERENCE CHART

Tool number (Kent-Moore No.) Tool name		Description
(-) Power tool		Loosening nuts and bolts
KV991J0100 (J-46531) TORX socket		Removing and installing flywheel Size: T55
(-) Manual lift table caddy		Removing and installing engine
(J-24239-01) Cylinder head bolt wrench		Loosening and tightening cylinder head bolt, and used with angle wrench [SST: KV10112100 (BT8653-A)] a: 13 (0.51) dia. b: 12 (0.47) c: 10 (0.39) Unit: mm (in)
(-) Spark plug wrench		Removing and installing spark plug
(-) Valve seat cutter set		Finishing valve seat dimensions
(-) Piston ring expander		Removing and installing piston ring
(-) Valve guide drift		Removing and installing valve guide Intake and Exhaust: a: 9.5 mm (0.374 in) dia. b: 5.5 mm (0.217 in) dia.
(-) Valve guide reamer		Reaming valve guide inner hole Reaming hole for oversize valve guide Intake and Exhaust: d1 : 6.0 mm (0.236 in) dia. d2 : 10.175 - 10.196 mm (0.4006 - 0.4014 in) dia.
(J-43897-18) (J-43897-12) Oxygen sensor thread cleaner		Reconditioning the exhaust system threads before installing a new heated oxygen sensor (Use with anti-seize lubricant shown below.) a: J-43897-18 [18 mm (0.71 in) dia.] for zirconia heated oxygen sensor b: J-43897-12 [12 mm (0.47 in) dia.] for titania heated oxygen sensor
(-) Anti-seize lubricant (Permatex 133AR or equivalent meeting MIL specification MIL-A-907)		Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads