ASCD Clutch Switch

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.
Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

Fig 1: ASCD Clutch Switch Terminals 1 And 2 Continuity Table
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to , and perform step 3 again.