DTC Confirmation Test
WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If a DTC confirmation test has been previously performed, turn ignition off and wait at least 10 seconds before performing next DTC confirmation test. Ensure battery voltage is more than 10.5 volts at idle.
- Turn ignition on.
- Select DATA MONITOR mode with scan tool.
- Start engine and let it idle for at least 60 seconds.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.