Method For TCM Initialization
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Perform "CONSULT-II START PROCEDURE". Refer to "CONSULT-II START PROCEDURE ".
- Set the vehicle following the items listed below.
- Ignition switch "ON".
- Selector lever "P" or "N" position.
- Engine not running.
- Vehicle speed is 0km/h (0 MPH).
- Ignition voltage is more than 10.5V.
- Malfunction was not detected.
- Touch "WORK SUPPORT".
- Touch "INITIALIZATION".
- Initialize TCM following the direction in display.