Consult-II Start Procedure

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Connect CONSULT-II. Refer to "CONSULT-II START PROCEDURE ".
Select "MULTI REMOTE ENT" on "SELECT TEST ITEM" screen.

Fig 1: CONSULT II Display - SELECT TEST ITEM
Courtesy of NISSAN MOTOR CO., U.S.A.
Select diagnosis mode.
"DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.

Fig 2: CONSULT II Display - SELECT DIAG MODE
Courtesy of NISSAN MOTOR CO., U.S.A.