Active Check Function
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Operation Description
When a door is locked or unlocked by keyfob operation, the vehicle hazard lamps flash and the horn sounds to verify operation.
- When a button on the keyfob is operated, the signal is sent from the keyfob and received by the keyless remote entry receiver.
- The received signal is sent to the BCM and compared with the registered ID number.
- If the ID number matches, the BCM sends the hazard lamps flashing and horn signals to the IPDM E/R.
- The IPDM E/R flashes the hazard lamps and sounds the horn (when in C mode) for each keyfob operation.